Ready Packaged Products

Description

ArtSLV-G10: :PoliIt is a polymer-added, cement-based, ready-made mortar reinforced with special chemicals for soluble dissolution and testing.
It is a self-leveling floor leveling screed that eliminates surface defects and roughness.

 

Usage areas:

1- It is used to level the surface with a thickness of 2- 10 mm before laying ceramics, granite, marble, wood, parquet, laminate, carpet, linoleum and PVC coatings.

2- Shopping malls and stores are used.

3- It is used indoors and in dry environments.

4- It is used in residences, hospitals and educational buildings.

 

Advantages:

*This material is more durable, faster to apply and a more economical option than other screed materials.

*This material has features that can automatically level itself and create a high-strength and homogeneous surface.

*The application time is quite short, it provides a solid connection to the base floor and prevents cracking, splitting or other deformations on the surface.

* After setting, it creates a smooth, shiny and hard surface.
*Practical and fast application opportunity.

*Suitable for hand and machine applications.

*Fireproof (A1 class)

*

Surface Preparation:

• Application surface is cured and robust should be careful.

• Application surface is powder, oil, tar, tar, paint, silicone, adhesion such as curing agent, detergent and mold oils preventive substances.

• Repair for the repair of cracks and holes on the surface mortars should be used.

• The concrete surfaces should be primed with Plaster Primer before gross concrete applications.

• The application surface should be moistened.

 

Preparation of Mortar:

• 25 kg package material and 6 liters of clean water preferably with a low-speed mixer. Mix and use in such a way that no lumps remain.

• The mixture in the container should be consumed within 2-3 hours.

 

Application Information:

• Material spraying machine or trowel should be applied and spread over the entire surface of equal thickness.

• The surface should be smoothed with a gauge after the application.

• The application of fine plaster should not exceed 30 mm.

• The plaster starts to harden before the time is missed it should be smoothed with a trowel.

• Combination of different materials such as concrete, brick and cracking of window, door corners plaster mesh should be used.

• Air temperature after the application is completed if it is high, it is moistened until it gets the plaster setting.

• Weather conditions and application thickness for paint

Depending on the need to wait at least 7 days.

 

Consumption:

1.2 - 1.3 kg / m2

 (For 1 cm thickness)

Attention:

• At temperatures below + 5 ° C and above + 35 ° C. Avoid application.

• Lime, cement, sand, and plaster into the material. Do not add foreign substances such as.

• Pay attention to the amount of water added to the mortar. Do not add more water than necessary.

• Risk of freezing within 24 hours or without application in direct sun and wind avoid

 

Packing:

In 25 kg plastic bags

 

Shelf life:

In humid environments and unopened packaging

It can be stored on pallet for 12 months with 10 layers stacking.

 

Health and Safety:

As with all chemical products during the storage of food products, skin, eyes and mouth contact. During application, work and protective clothing, protective clothing gloves, goggles and mask should be used. By accident if swallowed, seek medical advice. In contact with skin wash with plenty of water. Out of reach of children should be stored in places.

 

Technical specifications